P0328 – OBD-II DTC

OBD-II DTC P0328 – Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)

DTC P0328 meaning

DTC P0328 refers to a diagnostic trouble code indicating a low input signal from the knock sensor 1 circuit on bank 1 or a single sensor. The knock sensor is responsible for detecting engine knock or pinging, which can indicate abnormal combustion. When the engine control module (ECM) receives a signal that is lower than expected from the knock sensor, it triggers this code.

DTC P0328 symptoms

Common symptoms associated with DTC P0328 may include:

• Check Engine Light illuminated
• Decreased engine performance
• Increased fuel consumption
• Engine knocking or pinging sounds
• Rough idling or stalling

DTC P0328 causes

Several factors can lead to the triggering of DTC P0328, including:

• Faulty knock sensor
• Wiring issues or damaged connectors in the knock sensor circuit
• Faulty engine control module (ECM)
• Improper engine timing
• Excessive engine vibration

DTC P0328 seriousness

DTC P0328 can be serious as it may indicate that the engine is experiencing abnormal combustion. If left unaddressed, this can lead to engine damage over time. It is important to diagnose and resolve the issue promptly to maintain engine performance and prevent further complications.

How to diagnose DTC P0328

To diagnose DTC P0328, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the knock sensor and its wiring for any visible damage or disconnections.
3. Check the resistance of the knock sensor using a multimeter to ensure it is within specifications.
4. Test the voltage and ground supply to the knock sensor.
5. Examine the ECM for any faults or updates that may affect sensor readings.

How to fix DTC P0328 step-by-step instructions

To fix DTC P0328, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the knock sensor.
2. Replace the knock sensor if it is found to be faulty.
3. Ensure that the engine timing is set correctly and that there are no issues causing excessive vibration.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the code does not return.

How to erase DTC P0328

To erase DTC P0328, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.