P0329 – OBD-II DTC

OBD-II DTC P0329 – Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

DTC P0329 meaning

DTC P0329 refers to a diagnostic trouble code indicating a high input signal from the knock sensor circuit for Bank 1 or a single sensor. The knock sensor is responsible for detecting engine knock or pinging, which can indicate abnormal combustion. When the engine control module (ECM) receives a voltage signal from the knock sensor that exceeds the expected range, it triggers this code.

DTC P0329 symptoms

Common symptoms associated with DTC P0329 may include:

• Illuminated check engine light
• Decreased engine performance
• Increased fuel consumption
• Engine knocking or pinging sounds
• Rough idling or stalling

DTC P0329 causes

Several factors can lead to the triggering of DTC P0329, including:

• Faulty knock sensor
• Wiring issues or short circuits in the knock sensor circuit
• Corroded or loose connectors
• Faulty engine control module (ECM)
• Engine mechanical issues, such as excessive carbon buildup

DTC P0329 seriousness

DTC P0329 can be serious as it may indicate that the engine is experiencing abnormal combustion. If left unaddressed, this can lead to engine damage, reduced performance, and increased emissions. It is advisable to diagnose and repair the issue promptly to avoid further complications.

How to diagnose DTC P0329

To diagnose DTC P0329, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0329 code.
2. Inspect the knock sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of debris.
4. Test the knock sensor’s resistance and voltage output according to the manufacturer’s specifications.
5. Perform a visual inspection of the engine for any mechanical issues that could cause knocking.
6. Clear the code and take the vehicle for a test drive to see if the code reappears.

How to fix DTC P0329 step-by-step instructions

To fix DTC P0329, follow these steps:

1. Identify and repair any wiring issues or damaged connectors related to the knock sensor.
2. If the knock sensor is faulty, replace it with a new one.
3. Ensure that the new sensor is properly installed and connected.
4. Check for any engine mechanical issues that may need addressing, such as carbon buildup.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the code does not return and that the engine runs smoothly.

How to erase DTC P0329

To erase DTC P0329, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.