P0330 – OBD-II DTC

OBD-II DTC P0330 – Knock Sensor 1 Circuit Intermittent (Bank 1 or Single Sensor)

DTC P0330 meaning

DTC P0330 refers to a diagnostic trouble code indicating an intermittent issue with the Knock Sensor 1 circuit on Bank 1 or a single sensor. The knock sensor is responsible for detecting engine knock or pinging, which can indicate abnormal combustion. When the Engine Control Module (ECM) detects a problem with the knock sensor circuit, it triggers this code to alert the technician of the issue.

DTC P0330 symptoms

Common symptoms associated with DTC P0330 may include:

• Illuminated check engine light
• Decreased engine performance
• Increased fuel consumption
• Engine knocking or pinging sounds
• Rough idling or stalling

DTC P0330 causes

Several factors can lead to the triggering of DTC P0330, including:

• Faulty knock sensor
• Wiring issues, such as frayed or damaged wires
• Poor electrical connections or corrosion
• Faulty Engine Control Module (ECM)
• Engine mechanical issues affecting knock detection

DTC P0330 seriousness

DTC P0330 can be serious as it may indicate that the engine is experiencing abnormal combustion. If left unaddressed, this can lead to:

• Engine damage due to knocking
• Increased emissions
• Reduced fuel efficiency
• Potential failure of other engine components

How to diagnose DTC P0330

To diagnose DTC P0330, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the knock sensor and its wiring for visible damage.
3. Check electrical connections for corrosion or looseness.
4. Test the knock sensor’s resistance and voltage output.
5. Perform a visual inspection of the engine for mechanical issues.
6. Clear the code and take the vehicle for a test drive to see if the code returns.

How to fix DTC P0330 step-by-step instructions

To fix DTC P0330, follow these steps:

1. Disconnect the battery to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the knock sensor.
3. If the knock sensor is faulty, replace it with a new one.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Start the engine and monitor for any abnormal sounds or performance issues.
6. Take the vehicle for a test drive to ensure the code does not return.

How to erase DTC P0330

To erase DTC P0330, you can follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the code.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.