P0333 – OBD-II DTC

OBD-II DTC P0333 – Knock Sensor 2 Circuit Low Input (Bank 2)

DTC P0333 meaning

DTC P0333 refers to a diagnostic trouble code indicating a low input signal from the knock sensor 2 circuit on bank 2 of the engine. The knock sensor is responsible for detecting engine knock or pinging, which can indicate abnormal combustion. When the engine control module (ECM) detects a voltage level that is lower than expected from the knock sensor, it triggers this code.

DTC P0333 symptoms

Common symptoms associated with DTC P0333 may include:

• Illuminated check engine light
• Reduced engine performance
• Increased fuel consumption
• Engine knocking or pinging sounds
• Rough idling or stalling

DTC P0333 causes

Several factors can lead to the occurrence of DTC P0333, including:

• Faulty knock sensor 2
• Wiring issues, such as shorts or open circuits in the knock sensor circuit
• Corroded or loose connectors
• Faulty engine control module (ECM)
• Mechanical issues within the engine, such as excessive engine noise

DTC P0333 seriousness

DTC P0333 can be considered serious as it may lead to engine damage if not addressed. The knock sensor plays a crucial role in preventing engine knock, which can cause severe damage over time. Ignoring this code may result in poor engine performance and increased emissions.

How to diagnose DTC P0333

To diagnose DTC P0333, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0333 code.
2. Inspect the wiring and connectors related to knock sensor 2 for damage or corrosion.
3. Test the knock sensor using a multimeter to check for proper resistance and voltage output.
4. Check for any additional trouble codes that may indicate related issues.
5. Perform a visual inspection of the engine for any mechanical problems that could cause knocking.

How to fix DTC P0333 step-by-step instructions

To fix DTC P0333, follow these steps:

1. Repair or replace any damaged wiring or connectors associated with the knock sensor circuit.
2. If the knock sensor is faulty, replace it with a new one.
3. Clear any debris or corrosion from the connectors and ensure a secure connection.
4. Check the engine for any mechanical issues that may cause knocking and address them accordingly.
5. Re-scan the vehicle with the OBD-II scanner to ensure the code has been cleared and does not return.

How to erase DTC P0333

To erase DTC P0333, you can follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.