P0339 – OBD-II DTC

OBD-II DTC P0339 – Crankshaft Position Sensor A Circuit High Input

DTC P0339 meaning

DTC P0339 refers to a diagnostic trouble code indicating a high input signal from the Crankshaft Position Sensor A circuit. This sensor is crucial for monitoring the position and rotational speed of the crankshaft, which is essential for engine timing and performance. A high input signal suggests that the sensor is detecting an abnormal voltage level, which can lead to issues with engine operation.

DTC P0339 symptoms

Common symptoms associated with DTC P0339 may include:

• Engine misfires or rough idling
• Difficulty starting the engine
• Loss of power during acceleration
• Check Engine Light illuminated
• Increased fuel consumption

DTC P0339 causes

Several factors can contribute to the occurrence of DTC P0339, including:

• Faulty crankshaft position sensor
• Wiring issues, such as shorts or open circuits
• Corroded or damaged connectors
• Faulty engine control module (ECM)
• Timing belt or chain issues affecting sensor alignment

DTC P0339 seriousness

DTC P0339 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in engine stalling, reduced power, and potential damage to engine components. It is advisable to diagnose and repair the issue promptly to ensure safe and efficient vehicle operation.

How to diagnose DTC P0339

To diagnose DTC P0339, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0339 code.
2. Inspect the crankshaft position sensor and its wiring for visible damage or corrosion.
3. Check the sensor’s connector for secure connections and signs of wear.
4. Test the voltage output of the crankshaft position sensor using a multimeter.
5. Inspect the timing belt or chain for proper alignment and condition.
6. Examine the engine control module for any faults or updates.

How to fix DTC P0339 step-by-step instructions

To fix DTC P0339, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and replace the crankshaft position sensor if it is faulty.
3. Repair or replace any damaged wiring or connectors associated with the sensor.
4. Ensure the timing belt or chain is properly aligned and in good condition.
5. Reconnect the battery terminal and clear the DTC using an OBD-II scanner.
6. Start the engine and monitor for any reoccurrence of the code.

How to erase DTC P0339

To erase DTC P0339, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.