P0341 – OBD-II DTC

OBD-II DTC P0341 – Camshaft Position Sensor Circuit Malfunction

DTC P0341 meaning

DTC P0341 refers to a malfunction in the camshaft position sensor circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the signal from the camshaft position sensor, which is crucial for proper engine timing and performance. The camshaft position sensor monitors the position of the camshaft and sends this information to the ECM to help manage fuel injection and ignition timing.

DTC P0341 symptoms

Common symptoms associated with DTC P0341 may include:

• Check Engine Light illuminated
• Engine misfires or runs rough
• Difficulty starting the engine
• Decreased engine performance
• Increased fuel consumption
• Stalling or hesitation during acceleration

DTC P0341 causes

Several factors can lead to the occurrence of DTC P0341, including:

• Faulty camshaft position sensor
• Wiring issues, such as damaged or corroded connectors
• Faulty Engine Control Module (ECM)
• Timing belt or chain issues
• Oil contamination affecting the sensor
• Improper installation of the sensor

DTC P0341 seriousness

DTC P0341 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in:

• Increased emissions
• Potential engine damage due to improper timing
• Reduced fuel efficiency
• Inability to pass emissions tests

How to diagnose DTC P0341

To diagnose DTC P0341, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0341 code.
2. Inspect the camshaft position sensor and its wiring for any visible damage or corrosion.
3. Check the sensor’s electrical connector for proper connection and signs of wear.
4. Test the camshaft position sensor using a multimeter to ensure it is functioning within specifications.
5. Inspect the timing belt or chain for proper alignment and condition.
6. Clear the code and take the vehicle for a test drive to see if the code reappears.

How to fix DTC P0341 step-by-step instructions

To fix DTC P0341, follow these steps:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the camshaft position sensor.
3. If the sensor is faulty, replace it with a new one, ensuring proper installation.
4. Check and adjust the timing belt or chain if necessary.
5. Reconnect the battery terminal and clear the DTC using an OBD-II scanner.
6. Start the engine and monitor for any reoccurrence of the code.

How to erase DTC P0341

To erase DTC P0341, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.