P0352 – OBD-II DTC

OBD-II DTC P0352 – Ignition Coil A Primary/Secondary Circuit Malfunction

DTC P0352 meaning

DTC P0352 refers to a malfunction in the ignition coil A primary/secondary circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the ignition coil circuit for cylinder A, which can affect the engine’s performance and efficiency. The ignition coil is responsible for converting the battery’s low voltage into the high voltage needed to ignite the air-fuel mixture in the engine’s cylinders.

DTC P0352 symptoms

Common symptoms associated with DTC P0352 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Difficulty starting the engine
• Check Engine Light (CEL) illuminated

DTC P0352 causes

Several factors can lead to the triggering of DTC P0352, including:

• Faulty ignition coil A
• Wiring issues or damaged connectors in the ignition coil circuit
• Faulty Engine Control Module (ECM)
• Short circuits or open circuits in the ignition system
• Corrosion or poor connections in the ignition coil circuit

DTC P0352 seriousness

DTC P0352 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. If left unaddressed, it can result in poor fuel economy, increased emissions, and potential damage to other engine components. It is advisable to diagnose and repair the issue promptly to maintain optimal engine performance.

How to diagnose DTC P0352

To diagnose DTC P0352, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0352 code.
2. Inspect the ignition coil A and its wiring for any visible damage or corrosion.
3. Check the resistance of the ignition coil using a multimeter to ensure it is within specifications.
4. Test the voltage supply to the ignition coil while the engine is running.
5. Examine the ECM for any signs of failure or damage.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC P0352 step-by-step instructions

To fix DTC P0352, follow these steps:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to ignition coil A.
3. If the ignition coil A is faulty, replace it with a new one.
4. Reconnect the wiring and ensure all connections are secure.
5. Reconnect the negative battery terminal.
6. Clear the DTC using an OBD-II scanner.
7. Start the engine and perform a road test to verify that the issue is resolved.

How to erase DTC P0352

To erase DTC P0352, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the DTC from the ECM.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.