P0353 – OBD-II DTC

OBD-II DTC P0353 – Ignition Coil B Primary/Secondary Circuit Malfunction

DTC P0353 meaning

DTC P0353 refers to a malfunction in the ignition coil B primary/secondary circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that powers the ignition coil responsible for firing the spark plugs in cylinder B. The ignition coil is crucial for converting the battery’s low voltage into the high voltage needed to ignite the air-fuel mixture in the engine’s combustion chamber.

DTC P0353 symptoms

Common symptoms associated with DTC P0353 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Difficulty starting the engine
• Check Engine Light illuminated
• Increased fuel consumption

DTC P0353 causes

Several factors can lead to the triggering of DTC P0353, including:

• Faulty ignition coil B
• Open or short circuit in the ignition coil wiring
• Defective Engine Control Module (ECM)
• Poor electrical connections or corroded terminals
• Faulty spark plugs or ignition components

DTC P0353 seriousness

DTC P0353 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. If left unaddressed, it can result in poor engine performance, increased emissions, and potential damage to other engine components. It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance and reliability.

How to diagnose DTC P0353

To diagnose DTC P0353, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0353 code.
2. Inspect the ignition coil B and its wiring for any visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of debris.
4. Test the ignition coil B using a multimeter to check for proper resistance.
5. Inspect the ECM for any signs of damage or malfunction.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P0353 step-by-step instructions

To fix DTC P0353, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to ignition coil B.
3. If the ignition coil B is faulty, replace it with a new one.
4. Check and replace any worn or damaged spark plugs.
5. Reconnect the battery terminal and clear the DTC using an OBD-II scanner.
6. Start the engine and perform a test drive to ensure the issue is resolved.

How to erase DTC P0353

To erase DTC P0353, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.