P0357 – OBD-II DTC

OBD-II DTC P0357 – Ignition Coil F Primary/Secondary Circuit Malfunction

DTC P0357 meaning

DTC P0357 refers to a malfunction in the ignition coil F primary/secondary circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the electrical circuit that controls the ignition coil for cylinder F. The ignition coil is responsible for converting the battery’s low voltage into the high voltage needed to create a spark in the engine’s combustion chamber. A malfunction in this circuit can lead to poor engine performance, misfires, or even engine stalling.

DTC P0357 symptoms

Common symptoms associated with DTC P0357 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Difficulty starting the engine
• Illuminated check engine light
• Increased fuel consumption

DTC P0357 causes

Several factors can contribute to the occurrence of DTC P0357, including:

• Faulty ignition coil F
• Damaged wiring or connectors in the ignition coil circuit
• Short circuits or open circuits in the primary or secondary circuit
• Faulty Engine Control Module (ECM)
• Corrosion or poor connections in the ignition system

DTC P0357 seriousness

DTC P0357 can be considered serious as it can lead to engine misfires, which may cause further damage to the engine over time. If left unaddressed, it can result in poor fuel economy, increased emissions, and potential damage to other engine components. It is advisable to diagnose and repair the issue promptly to maintain optimal engine performance and reliability.

How to diagnose DTC P0357

To diagnose DTC P0357, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0357 code.
2. Inspect the ignition coil F and its wiring for any visible damage or corrosion.
3. Check the connectors for secure connections and signs of wear.
4. Test the ignition coil F using a multimeter to ensure it is functioning correctly.
5. Inspect the ECM for any faults or updates that may be necessary.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P0357 step-by-step instructions

To fix DTC P0357, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Remove the ignition coil F from the engine.
3. Inspect the ignition coil for any signs of damage or wear.
4. If the ignition coil is faulty, replace it with a new one.
5. Check the wiring and connectors for any damage repair or replace as necessary.
6. Reconnect the ignition coil and ensure all connections are secure.
7. Reconnect the negative battery terminal.
8. Use an OBD-II scanner to clear the DTC and perform a test drive.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.