P0359 – OBD-II DTC

OBD-II DTC P0359 – Ignition Coil H Primary/Secondary Circuit Malfunction

DTC P0359 meaning

DTC P0359 refers to a malfunction in the ignition coil H primary/secondary circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the ignition coil circuit associated with cylinder H. The ignition coil is responsible for converting the battery’s low voltage into the high voltage needed to ignite the air-fuel mixture in the engine’s cylinders. A malfunction in this circuit can lead to poor engine performance, misfires, or even engine stalling.

DTC P0359 symptoms

Common symptoms associated with DTC P0359 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Difficulty starting the engine
• Check Engine Light illuminated
• Increased fuel consumption

DTC P0359 causes

Several factors can contribute to the occurrence of DTC P0359, including:

• Faulty ignition coil
• Wiring issues, such as damaged or corroded connectors
• Short circuits in the ignition coil circuit
• Faulty Engine Control Module (ECM)
• Issues with the power supply to the ignition coil

DTC P0359 seriousness

DTC P0359 is considered a serious issue as it can lead to engine misfires, which may cause further damage to the engine over time. If left unaddressed, it can result in poor fuel efficiency, increased emissions, and potential engine damage. It is advisable to diagnose and repair the issue promptly to maintain optimal engine performance and reliability.

How to diagnose DTC P0359

To diagnose DTC P0359, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0359 code.
2. Inspect the ignition coil and its wiring for any visible damage or corrosion.
3. Check the resistance of the ignition coil using a multimeter to ensure it is within specifications.
4. Test the power supply to the ignition coil to ensure it is receiving the correct voltage.
5. Examine the ECM for any faults or updates that may be necessary.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC P0359 step-by-step instructions

To fix DTC P0359, follow these steps:

1. Identify and replace the faulty ignition coil if it is determined to be defective.
2. Repair or replace any damaged wiring or connectors in the ignition coil circuit.
3. Ensure that the ignition coil is properly connected and secured.
4. Check and replace any blown fuses related to the ignition system.
5. Recheck the power supply to the ignition coil to confirm it is functioning correctly.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the issue is resolved.

How to erase DTC P0359

To erase DTC P0359, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the diagnostic menu on the scanner and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.