P0362 – OBD-II DTC

OBD-II DTC P0362 – Ignition Coil K Primary/Secondary Circuit Malfunction

DTC P0362 meaning

DTC P0362 refers to a malfunction in the ignition coil K primary/secondary circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the ignition coil responsible for firing the engine’s cylinders. The ignition coil converts the battery’s low voltage to the high voltage needed to create a spark in the spark plugs, which ignites the air-fuel mixture in the engine. A malfunction in this circuit can lead to poor engine performance, misfires, or even engine stalling.

DTC P0362 symptoms

Common symptoms associated with DTC P0362 may include:

• Engine misfires
• Decreased engine performance
• Rough idling
• Difficulty starting the engine
• Increased fuel consumption
• Illuminated check engine light

DTC P0362 causes

Several factors can lead to the triggering of DTC P0362, including:

• Faulty ignition coil K
• Open or shorted wiring in the ignition coil circuit
• Corroded or damaged connectors
• Faulty Engine Control Module (ECM)
• Issues with the power supply to the ignition coil

DTC P0362 seriousness

DTC P0362 can be considered serious as it may lead to engine misfires, which can cause further damage to the engine over time. If left unaddressed, it can result in poor fuel efficiency, increased emissions, and potential engine failure. It is advisable to diagnose and repair the issue promptly to maintain optimal engine performance and reliability.

How to diagnose DTC P0362

To diagnose DTC P0362, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0362 code.
2. Inspect the ignition coil K and its wiring for any visible damage or corrosion.
3. Check the connectors for secure connections and signs of wear.
4. Test the ignition coil K using a multimeter to ensure it is functioning within specifications.
5. Inspect the ECM for any faults or updates that may be required.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P0362 step-by-step instructions

To fix DTC P0362, follow these steps:

1. Identify and replace the faulty ignition coil K if it is determined to be defective.
2. Repair or replace any damaged wiring or connectors in the ignition coil circuit.
3. Ensure all connections are secure and free from corrosion.
4. Check the power supply to the ignition coil and repair any issues found.
5. Reinstall any components removed during the diagnosis process.
6. Clear the DTC using an OBD-II scanner and perform a test drive to confirm the issue is resolved.

How to erase DTC P0362

To erase DTC P0362, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.