P0372 – OBD-II DTC

OBD-II DTC P0372 – Timing Reference High Resolution Signal A Too Many Pulses

DTC P0372 meaning

DTC P0372 refers to a diagnostic trouble code indicating that the engine control module (ECM) has detected too many pulses from the timing reference high-resolution signal A. This signal is crucial for the proper timing of the engine’s ignition and fuel injection systems. When the ECM receives an abnormal number of pulses, it suggests a potential issue with the timing reference system, which can lead to engine performance problems.

DTC P0372 symptoms

Common symptoms associated with DTC P0372 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Stalling or difficulty starting the engine
• Illuminated check engine light

DTC P0372 causes

Several factors can contribute to the occurrence of DTC P0372, including:

• Faulty crankshaft or camshaft position sensors
• Wiring issues or poor connections in the timing reference circuit
• Faulty ECM or software issues
• Timing belt or chain problems
• Mechanical issues within the engine affecting timing

DTC P0372 seriousness

DTC P0372 can be considered serious as it may lead to significant engine performance issues. If left unaddressed, it can result in:

• Increased emissions
• Potential engine damage
• Reduced fuel efficiency
• Complete engine failure in severe cases

How to diagnose DTC P0372

To diagnose DTC P0372, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the crankshaft and camshaft position sensors for damage or wear.
4. Examine the wiring and connectors for signs of corrosion or loose connections.
5. Test the sensors’ output using a multimeter to ensure they are functioning correctly.
6. Check the timing belt or chain for proper alignment and condition.
7. Review the ECM for any software updates or faults.

How to fix DTC P0372 step-by-step instructions

To fix DTC P0372, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and replace any faulty crankshaft or camshaft position sensors.
3. Repair or replace damaged wiring and connectors in the timing reference circuit.
4. Ensure the timing belt or chain is properly aligned and in good condition.
5. Update the ECM software if necessary.
6. Recheck the system for any remaining trouble codes after repairs.
7. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P0372

To erase DTC P0372, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to verify that the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.