P0374 – OBD-II DTC

OBD-II DTC P0374 – Timing Reference High Resolution Signal A Intermittent/Erratic Pulses

DTC P0374 meaning

DTC P0374 refers to a diagnostic trouble code indicating an issue with the timing reference high-resolution signal A. This code is triggered when the Engine Control Module (ECM) detects intermittent or erratic pulses from the high-resolution signal, which is crucial for proper engine timing and performance. The high-resolution signal is typically generated by the crankshaft or camshaft position sensors and is essential for accurate ignition timing and fuel injection control.

DTC P0374 symptoms

Common symptoms associated with DTC P0374 may include:

• Engine misfires
• Rough idling
• Decreased engine performance
• Difficulty starting the engine
• Check Engine Light (CEL) illuminated

DTC P0374 causes

Several factors can lead to the triggering of DTC P0374, including:

• Faulty crankshaft or camshaft position sensors
• Wiring issues, such as damaged or corroded connectors
• Faulty Engine Control Module (ECM)
• Timing belt or chain issues
• Interference from other electronic components

DTC P0374 seriousness

DTC P0374 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in:

• Increased emissions
• Potential engine damage
• Reduced fuel efficiency
• Complete engine failure in severe cases

How to diagnose DTC P0374

To diagnose DTC P0374, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the crankshaft and camshaft position sensors for damage or wear.
4. Examine wiring and connectors for corrosion or loose connections.
5. Test the sensors’ output using a multimeter to ensure they are functioning correctly.
6. Check the timing belt or chain for proper alignment and condition.
7. Review the ECM for any software updates or faults.

How to fix DTC P0374 step-by-step instructions

To fix DTC P0374, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Replace any faulty crankshaft or camshaft position sensors.
3. Repair or replace damaged wiring and connectors.
4. Ensure the timing belt or chain is properly aligned and in good condition.
5. Update or replace the ECM if necessary.
6. Recheck the system for any remaining codes after repairs.
7. Test drive the vehicle to ensure the issue is resolved.

How to erase DTC P0374

To erase DTC P0374, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.