P0375 – OBD-II DTC

OBD-II DTC P0375 – Timing Reference High Resolution Signal A No Pulses

DTC P0375 meaning

DTC P0375 refers to a problem with the timing reference high-resolution signal A, indicating that no pulses are being detected. This code is triggered when the Engine Control Module (ECM) does not receive the expected signal from the crankshaft or camshaft position sensors. These sensors are crucial for determining the engine’s timing and ensuring proper operation.

DTC P0375 symptoms

Common symptoms associated with DTC P0375 may include:

• Engine misfires
• Rough idling
• Difficulty starting the engine
• Loss of power during acceleration
• Check Engine Light illuminated

DTC P0375 causes

Several factors can lead to the triggering of DTC P0375, including:

• Faulty crankshaft or camshaft position sensors
• Wiring issues or damaged connectors
• Faulty Engine Control Module (ECM)
• Timing belt or chain problems
• Mechanical issues within the engine

DTC P0375 seriousness

DTC P0375 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in:

• Increased emissions
• Potential engine damage
• Reduced fuel efficiency
• Complete engine failure in severe cases

How to diagnose DTC P0375

To diagnose DTC P0375, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any related codes.
2. Inspect the crankshaft and camshaft position sensors for damage or wear.
3. Examine wiring and connectors for signs of corrosion or disconnection.
4. Test the sensors’ output using a multimeter to ensure they are functioning correctly.
5. Check the timing belt or chain for proper alignment and condition.
6. Inspect the ECM for faults or software issues.

How to fix DTC P0375 step-by-step instructions

To fix DTC P0375, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Replace any faulty crankshaft or camshaft position sensors.
3. Repair or replace damaged wiring and connectors.
4. Adjust or replace the timing belt or chain if necessary.
5. Reprogram or replace the ECM if it is found to be faulty.
6. Perform a test drive to ensure the issue is resolved and the DTC does not return.

How to erase DTC P0375

To erase DTC P0375, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.