P0387 – OBD-II DTC

OBD-II DTC P0387 – Crankshaft Position Sensor B Circuit Range/Performance

DTC P0387 meaning

DTC P0387 refers to a problem with the Crankshaft Position Sensor B Circuit. This code indicates that the performance or range of the sensor’s signal is outside the expected parameters. The crankshaft position sensor is crucial for the engine management system as it provides information about the position and speed of the crankshaft, which is essential for proper ignition timing and fuel injection.

DTC P0387 symptoms

Common symptoms associated with DTC P0387 may include:

• Check Engine Light illuminated
• Engine misfires or runs rough
• Difficulty starting the engine
• Decreased engine performance
• Stalling or hesitation during acceleration

DTC P0387 causes

Several factors can lead to the triggering of DTC P0387, including:

• Faulty crankshaft position sensor
• Wiring issues, such as damaged or corroded connectors
• Faulty engine control module (ECM)
• Improperly aligned or damaged crankshaft
• Issues with the timing belt or chain

DTC P0387 seriousness

DTC P0387 is considered a serious issue as it can affect engine performance and reliability. If left unaddressed, it may lead to further engine damage or failure. It is advisable to diagnose and repair the issue promptly to ensure safe and efficient vehicle operation.

How to diagnose DTC P0387

To diagnose DTC P0387, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the crankshaft position sensor and its wiring for any visible damage.
3. Check the sensor’s electrical connections for corrosion or looseness.
4. Test the crankshaft position sensor’s output signal using a multimeter.
5. Examine the timing belt or chain for proper alignment and condition.
6. Check the engine control module for any software updates or faults.

How to fix DTC P0387 step-by-step instructions

To fix DTC P0387, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on the vehicle.
2. Inspect and repair any damaged wiring or connectors related to the crankshaft position sensor.
3. If the sensor is faulty, replace it with a new one.
4. Ensure the timing belt or chain is properly aligned and in good condition replace if necessary.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Start the engine and monitor for any reoccurrence of the code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.