P0454 – OBD-II DTC

OBD-II DTC P0454 – Evaporative Emission Control System Pressure Sensor High Input

DTC P0454 meaning

DTC P0454 refers to a diagnostic trouble code that indicates a high input signal from the evaporative emission control system pressure sensor. This sensor is responsible for monitoring the pressure within the evaporative emissions system, which captures fuel vapors from the fuel tank and prevents them from escaping into the atmosphere. A high input signal suggests that the sensor is detecting a pressure level that exceeds the expected range, which can lead to issues with the vehicle’s emissions control system.

DTC P0454 symptoms

Common symptoms associated with DTC P0454 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough idling or stalling
• Failed emissions test
• Unusual fuel odor

DTC P0454 causes

Several factors can contribute to the occurrence of DTC P0454, including:

• Faulty evaporative emission control system pressure sensor
• Wiring issues, such as shorts or open circuits
• Vacuum leaks in the evaporative emissions system
• Faulty fuel tank or fuel cap
• ECM (Engine Control Module) malfunction

DTC P0454 seriousness

DTC P0454 is considered a moderate to serious issue. While it may not immediately affect the drivability of the vehicle, it can lead to increased emissions and potential damage to the evaporative emissions system if not addressed. Additionally, a vehicle with this code may fail an emissions test, which can prevent it from being legally driven until repaired.

How to diagnose DTC P0454

To diagnose DTC P0454, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0454 code.
2. Inspect the evaporative emission control system pressure sensor and its wiring for any visible damage or corrosion.
3. Check for vacuum leaks in the system, including hoses and connections.
4. Test the pressure sensor using a multimeter to ensure it is functioning within specifications.
5. Examine the fuel tank and fuel cap for proper sealing and functionality.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC P0454 step-by-step instructions

To fix DTC P0454, follow these steps:

1. Identify and replace any faulty evaporative emission control system pressure sensor.
2. Repair or replace damaged wiring or connectors associated with the pressure sensor.
3. Seal any vacuum leaks found in the evaporative emissions system.
4. Ensure the fuel tank and fuel cap are functioning correctly and replace if necessary.
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to confirm that the issue has been resolved and the code does not return.

How to erase DTC P0454

To erase DTC P0454, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.