P0455 – OBD-II DTC

OBD-II DTC P0455 – Evaporative Emission Control System Pressure Sensor Intermittent

DTC P0455 meaning

DTC P0455 refers to a diagnostic trouble code indicating a large leak in the Evaporative Emission Control System (EVAP). This system is responsible for capturing and storing fuel vapors from the fuel tank to prevent them from escaping into the atmosphere. A large leak suggests that there is a significant issue, such as a disconnected or damaged hose, a faulty gas cap, or a malfunctioning pressure sensor.

DTC P0455 symptoms

Common symptoms associated with DTC P0455 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Strong fuel odor
• Rough engine idle
• Failed emissions test

DTC P0455 causes

Several factors can lead to the triggering of DTC P0455, including:

• Loose or damaged gas cap
• Cracked or broken EVAP hoses
• Faulty EVAP pressure sensor
• Defective charcoal canister
• Leaking fuel tank
• Faulty purge valve

DTC P0455 seriousness

DTC P0455 is considered a moderate to serious issue. While it may not cause immediate engine performance problems, it can lead to increased emissions and potential damage to the EVAP system if not addressed. Additionally, it can result in failing an emissions test, which may prevent the vehicle from being legally driven in certain areas.

How to diagnose DTC P0455

To diagnose DTC P0455, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0455 code.
2. Inspect the gas cap for proper sealing and any signs of damage.
3. Check all EVAP hoses for cracks, breaks, or disconnections.
4. Test the EVAP pressure sensor for proper operation.
5. Examine the charcoal canister for any signs of damage or blockage.
6. Perform a smoke test to identify any leaks in the EVAP system.

How to fix DTC P0455 step-by-step instructions

To fix DTC P0455, follow these steps:

1. Inspect and tighten or replace the gas cap if it is loose or damaged.
2. Replace any cracked or broken EVAP hoses.
3. Test and replace the EVAP pressure sensor if it is faulty.
4. Replace the charcoal canister if it is damaged or clogged.
5. Repair or replace the fuel tank if a leak is detected.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P0455

To erase DTC P0455, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.