P0464 – OBD-II DTC

OBD-II DTC P0464 – Fuel Level Sensor Circuit High Input

DTC P0464 meaning

DTC P0464 refers to a diagnostic trouble code that indicates a high input signal from the fuel level sensor circuit. This code is triggered when the Engine Control Module (ECM) detects that the voltage signal from the fuel level sensor is higher than expected. The fuel level sensor is responsible for measuring the amount of fuel in the tank and sending this information to the ECM for accurate fuel gauge readings and fuel management.

DTC P0464 symptoms

Common symptoms associated with DTC P0464 may include:

• Inaccurate fuel gauge readings
• Fuel gauge stuck at full or empty
• Check Engine Light illuminated
• Possible erratic fuel level readings

DTC P0464 causes

Several factors can lead to the triggering of DTC P0464, including:

• Faulty fuel level sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connections
• Faulty Engine Control Module (ECM)
• Issues with the fuel tank or fuel sender unit

DTC P0464 seriousness

DTC P0464 can be considered a moderate issue. While it may not cause immediate engine performance problems, it can lead to inaccurate fuel readings, which may result in running out of fuel unexpectedly. Additionally, the Check Engine Light may distract the driver and mask other potential issues. It is advisable to address this code promptly to ensure accurate fuel level monitoring.

How to diagnose DTC P0464

To diagnose DTC P0464, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0464 code.
2. Inspect the fuel level sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connections for tightness and cleanliness.
4. Test the fuel level sensor’s resistance and voltage output according to the manufacturer’s specifications.
5. Examine the ECM for any software updates or faults.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC P0464 step-by-step instructions

To fix DTC P0464, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the fuel level sensor.
2. Replace the fuel level sensor if it is found to be faulty.
3. Ensure all electrical connections are clean and secure.
4. Check for any issues with the fuel tank or sender unit and repair as necessary.
5. Reinstall any components that were removed during the inspection.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify the fix.

How to erase DTC P0464

To erase DTC P0464, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.