P0468 – OBD-II DTC

OBD-II DTC P0468 – Purge Flow Sensor Circuit Low Input

DTC P0468 meaning

DTC P0468 refers to a diagnostic trouble code that indicates a low input signal from the purge flow sensor circuit. The purge flow sensor is responsible for monitoring the flow of fuel vapor from the charcoal canister to the engine intake. When the Engine Control Module (ECM) detects that the signal from this sensor is lower than expected, it triggers the P0468 code.

DTC P0468 symptoms

Common symptoms associated with DTC P0468 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough idling or stalling
• Difficulty starting the engine
• Increased emissions

DTC P0468 causes

Several factors can lead to the triggering of DTC P0468, including:

• Faulty purge flow sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connections
• Faulty Engine Control Module (ECM)
• Vacuum leaks in the EVAP system

DTC P0468 seriousness

DTC P0468 is considered a moderate issue. While it may not cause immediate engine failure, it can lead to increased emissions and reduced fuel efficiency. Ignoring this code can result in more significant problems over time, including potential damage to the engine or exhaust system.

How to diagnose DTC P0468

To diagnose DTC P0468, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0468 code.
2. Inspect the purge flow sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of debris.
4. Test the purge flow sensor with a multimeter to verify its resistance and output voltage.
5. Inspect the EVAP system for any vacuum leaks.
6. Clear the code and perform a drive cycle to see if the code returns.

How to fix DTC P0468 step-by-step instructions

To fix DTC P0468, follow these steps:

1. Identify and replace any faulty purge flow sensor.
2. Repair or replace damaged wiring or connectors in the purge flow sensor circuit.
3. Seal any vacuum leaks found in the EVAP system.
4. Clear the DTC using an OBD-II scanner.
5. Perform a drive cycle to ensure the code does not return.

How to erase DTC P0468

To erase DTC P0468, you can follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to verify that the code has been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.