P0470 – OBD-II DTC

OBD-II DTC P0470 – Purge Flow Sensor Circuit Intermittent

DTC P0470 meaning

DTC P0470 refers to an issue with the Purge Flow Sensor Circuit, indicating that there is an intermittent problem detected in the circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various components of the vehicle’s emissions system. The purge flow sensor is responsible for measuring the amount of fuel vapor that is purged from the charcoal canister into the engine for combustion. An intermittent fault suggests that the sensor may be experiencing sporadic failures or communication issues with the engine control module (ECM).

DTC P0470 symptoms

Common symptoms associated with DTC P0470 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough idling or stalling
• Increased emissions
• Difficulty starting the engine

DTC P0470 causes

Several factors can lead to the triggering of DTC P0470, including:

• Faulty purge flow sensor
• Wiring issues, such as frayed or shorted wires
• Corroded or loose electrical connectors
• Vacuum leaks in the EVAP system
• Faulty engine control module (ECM)

DTC P0470 seriousness

DTC P0470 is considered a moderate issue. While it may not cause immediate engine failure, it can lead to increased emissions and reduced fuel efficiency. Ignoring this code can result in more significant problems over time, including potential damage to the engine or emissions system. It is advisable to address this code promptly to maintain vehicle performance and compliance with emissions regulations.

How to diagnose DTC P0470

To diagnose DTC P0470, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0470 code.
2. Inspect the purge flow sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connectors for secure connections and signs of wear.
4. Test the purge flow sensor using a multimeter to ensure it operates within specifications.
5. Examine the EVAP system for vacuum leaks that could affect sensor readings.
6. Clear the code and perform a road test to see if the code reappears.

How to fix DTC P0470 step-by-step instructions

To fix DTC P0470, follow these step-by-step instructions:

1. Start by inspecting the purge flow sensor and its wiring for any visible damage.
2. If the sensor is faulty, replace it with a new one.
3. Repair or replace any damaged wiring or connectors found during the inspection.
4. Check for vacuum leaks in the EVAP system and repair as necessary.
5. Reconnect all electrical connections securely.
6. Clear the DTC using an OBD-II scanner.
7. Perform a road test to ensure the issue is resolved and the code does not return.

How to erase DTC P0470

To erase DTC P0470, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to read or clear trouble codes.
4. Choose the option to clear the DTCs.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the engine to verify that the Check Engine Light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.