P0507 – OBD-II DTC

OBD-II DTC P0507 – Idle Control System RPM Lower Than Expected

DTC P0507 meaning

DTC P0507 refers to the Idle Control System RPM Lower Than Expected. This diagnostic trouble code indicates that the engine’s idle speed is higher than what the Engine Control Module (ECM) expects. The ECM monitors the engine’s RPM and compares it to the desired idle speed. If the actual RPM is lower than the expected value, this code is triggered.

DTC P0507 symptoms

Common symptoms associated with DTC P0507 may include:

• Rough idle or unstable engine performance
• Increased fuel consumption
• Check Engine Light illuminated
• Engine stalling or hesitation during acceleration
• Difficulty in maintaining a steady speed

DTC P0507 causes

Several factors can lead to the triggering of DTC P0507, including:

• Vacuum leaks in the intake system
• Faulty throttle body or throttle position sensor
• Malfunctioning idle air control valve (IAC)
• Dirty or clogged air filter
• Issues with the mass airflow sensor (MAF)
• Faulty engine coolant temperature sensor

DTC P0507 seriousness

DTC P0507 can indicate a significant issue with the vehicle’s idle control system. While it may not cause immediate catastrophic failure, it can lead to poor engine performance, increased emissions, and potential damage to engine components over time. It is advisable to address this code promptly to ensure optimal vehicle operation.

How to diagnose DTC P0507

To diagnose DTC P0507, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0507 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the vacuum lines and intake system for leaks.
4. Examine the throttle body and IAC for proper operation and cleanliness.
5. Test the throttle position sensor and MAF sensor for accurate readings.
6. Check the engine coolant temperature sensor for proper function.
7. Clear the codes and perform a road test to see if the code reappears.

How to fix DTC P0507 step-by-step instructions

To fix DTC P0507, follow these step-by-step instructions:

1. Inspect and repair any vacuum leaks in the intake system.
2. Clean the throttle body and IAC valve to ensure they are free of carbon buildup.
3. Replace any faulty sensors, such as the throttle position sensor or MAF sensor.
4. Check and replace the air filter if it is dirty or clogged.
5. Ensure the engine coolant temperature sensor is functioning correctly and replace it if necessary.
6. After repairs, clear the DTC using an OBD-II scanner.
7. Perform a road test to confirm that the issue has been resolved and the code does not return.

How to erase DTC P0507

To erase DTC P0507, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.