P0552 – OBD-II DTC

OBD-II DTC P0552 – Power Steering Pressure Sensor Circuit Range/Performance

DTC P0552 meaning

DTC P0552 refers to a problem with the Power Steering Pressure Sensor Circuit. This code indicates that the signal from the power steering pressure sensor is out of the expected range or is performing poorly. The power steering pressure sensor monitors the hydraulic pressure in the power steering system and sends this information to the engine control module (ECM) to adjust the power steering assist accordingly.

DTC P0552 symptoms

Common symptoms associated with DTC P0552 may include:

• Illuminated check engine light
• Increased steering effort, especially at low speeds
• Unusual noises from the power steering system
• Erratic power steering assist
• Steering wheel vibration

DTC P0552 causes

Several factors can lead to the triggering of DTC P0552, including:

• Faulty power steering pressure sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connectors
• Low power steering fluid levels
• Faulty power steering pump

DTC P0552 seriousness

DTC P0552 can be considered a moderate to serious issue. While it may not cause immediate vehicle failure, it can lead to increased steering effort and potential loss of power steering assist, making the vehicle harder to control. This can pose safety risks, especially in emergency situations or during low-speed maneuvers.

How to diagnose DTC P0552

To diagnose DTC P0552, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0552 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the power steering pressure sensor and its wiring for damage or corrosion.
4. Verify the power steering fluid level and condition.
5. Test the power steering pressure sensor using a multimeter to check for proper voltage and resistance.
6. Check the power steering pump for proper operation.

How to fix DTC P0552 step-by-step instructions

To fix DTC P0552, follow these steps:

1. Address any wiring issues by repairing or replacing damaged wires and connectors.
2. Replace the power steering pressure sensor if it is found to be faulty.
3. Ensure the power steering fluid is at the correct level and in good condition top off or replace as necessary.
4. Inspect and, if necessary, replace the power steering pump if it is not functioning correctly.
5. Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.