P0560 – OBD-II DTC

OBD-II DTC P0560 – Power Steering Pressure Sensor Circuit Intermittent

DTC P0560 meaning

DTC P0560 refers to a diagnostic trouble code indicating an intermittent issue in the Power Steering Pressure Sensor Circuit. This code is triggered when the Engine Control Module (ECM) detects a problem with the signal from the power steering pressure sensor, which is responsible for monitoring the hydraulic pressure in the power steering system. An intermittent fault suggests that the issue may not be constant, making it more challenging to diagnose.

DTC P0560 symptoms

Common symptoms associated with DTC P0560 may include:

• Illuminated check engine light
• Increased steering effort, especially at low speeds
• Unusual noises from the power steering system
• Erratic power steering assist
• Potential loss of power steering assist

DTC P0560 causes

Several factors can lead to the triggering of DTC P0560, including:

• Faulty power steering pressure sensor
• Wiring issues, such as frayed or damaged wires
• Corroded or loose electrical connectors
• Low power steering fluid levels
• Faulty ECM or software issues

DTC P0560 seriousness

The seriousness of DTC P0560 can vary. While it may not cause immediate safety concerns, it can lead to increased steering effort and potential loss of power steering assist, which can affect vehicle handling. It is advisable to address this code promptly to ensure safe driving conditions and prevent further damage to the power steering system.

How to diagnose DTC P0560

To diagnose DTC P0560, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0560 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the power steering pressure sensor and its wiring for visible damage.
4. Test the power steering pressure sensor using a multimeter to ensure it is functioning correctly.
5. Check the power steering fluid level and condition.
6. Examine electrical connectors for corrosion or loose connections.
7. Clear the code and take the vehicle for a test drive to see if the code reappears.

How to fix DTC P0560 step-by-step instructions

To fix DTC P0560, follow these steps:

1. Identify and replace a faulty power steering pressure sensor if necessary.
2. Repair or replace any damaged wiring or connectors in the power steering pressure sensor circuit.
3. Ensure that the power steering fluid is at the correct level and in good condition top off or replace if needed.
4. Reprogram or replace the ECM if it is determined to be faulty.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to confirm that the issue has been resolved and the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.