P0563 – OBD-II DTC

OBD-II DTC P0563 – A/C pressure sensor low voltage(Chrysler)

DTC P0563 meaning

DTC P0563 indicates that the A/C pressure sensor is reporting a low voltage condition. This code is specific to Chrysler vehicles and suggests that the Engine Control Module (ECM) has detected a voltage level from the A/C pressure sensor that is below the expected range. The A/C pressure sensor monitors the refrigerant pressure in the air conditioning system, and low voltage readings can affect the performance of the A/C system.

DTC P0563 symptoms

Common symptoms associated with DTC P0563 may include:

• Inoperative air conditioning system
• Increased cabin temperature
• Compressor not engaging
• Erratic A/C performance
• Potential overheating of the engine

DTC P0563 causes

Several factors can lead to the triggering of DTC P0563, including:

• Faulty A/C pressure sensor
• Wiring issues, such as shorts or open circuits
• Corroded or loose electrical connections
• Faulty Engine Control Module (ECM)
• Low refrigerant levels in the A/C system

DTC P0563 seriousness

The seriousness of DTC P0563 can vary, but it is generally considered a moderate issue. While it may not cause immediate safety concerns, it can lead to discomfort due to ineffective air conditioning. Additionally, if left unaddressed, it may result in further damage to the A/C system or other related components.

How to diagnose DTC P0563

To diagnose DTC P0563, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0563 code.
2. Inspect the A/C pressure sensor and its wiring for any visible damage or corrosion.
3. Check the voltage output of the A/C pressure sensor using a multimeter.
4. Verify the refrigerant level in the A/C system.
5. Test the A/C pressure sensor by replacing it with a known good unit if necessary.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC P0563 step-by-step instructions

To fix DTC P0563, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the A/C pressure sensor.
2. Replace the A/C pressure sensor if it is found to be faulty.
3. Ensure that the refrigerant level is adequate and recharge if necessary.
4. Clear the DTC using an OBD-II scanner.
5. Test the A/C system to ensure proper operation and monitor for any reoccurrence of the code.

How to erase DTC P0563

To erase DTC P0563, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.