P0605 – OBD-II DTC

OBD-II DTC P0605 – Internal Control Module Random Access Memory (RAM) Error

DTC P0605 meaning

DTC P0605 refers to an Internal Control Module Random Access Memory (RAM) Error. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected a malfunction in its internal RAM. The RAM is crucial for the ECM to store temporary data and execute functions effectively. When this error occurs, it suggests that the ECM is unable to perform its tasks due to memory issues.

DTC P0605 symptoms

Common symptoms associated with DTC P0605 may include:

• Check Engine Light illuminated
• Engine stalling or misfiring
• Loss of power or poor acceleration
• Inconsistent engine performance
• Difficulty starting the engine

DTC P0605 causes

Several factors can lead to the occurrence of DTC P0605, including:

• Faulty Engine Control Module (ECM)
• Corrupted software or firmware in the ECM
• Electrical issues such as short circuits or open circuits
• Bad connections or damaged wiring harness
• Voltage irregularities or power supply issues

DTC P0605 seriousness

DTC P0605 is considered a serious issue as it can affect the overall performance and reliability of the vehicle. If left unaddressed, it may lead to:

• Increased emissions
• Potential engine damage
• Inability to pass emissions tests
• Complete engine failure in severe cases

How to diagnose DTC P0605

To diagnose DTC P0605, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0605 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the ECM for damage or corrosion.
4. Test the power and ground circuits to the ECM to ensure proper voltage levels.
5. Perform a visual inspection of the ECM for any signs of physical damage.
6. Consider updating or reprogramming the ECM software if necessary.

How to fix DTC P0605 step-by-step instructions

To fix DTC P0605, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the ECM.
2. Ensure that the ECM is receiving the correct voltage and ground.
3. If the ECM is faulty, replace it with a new or refurbished unit.
4. Reprogram or update the ECM software if applicable.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the Check Engine Light does not reappear.

How to erase DTC P0605

To erase DTC P0605, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to verify that the Check Engine Light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.