P0656 – OBD-II DTC

OBD-II DTC P0656 – Engine Hot Lamp Output Control Circuit Malfucntion

DTC P0656 meaning

DTC P0656 refers to a malfunction in the Engine Hot Lamp Output Control Circuit. This diagnostic trouble code indicates that the engine control module (ECM) has detected an issue with the circuit responsible for controlling the engine temperature warning light. The engine hot lamp is designed to alert the driver when the engine temperature exceeds safe operating limits.

DTC P0656 symptoms

Common symptoms associated with DTC P0656 may include:

• Engine temperature warning light illuminated on the dashboard
• Possible overheating of the engine
• Erratic or non-functioning temperature gauge
• Potential engine performance issues

DTC P0656 causes

Several factors can lead to the triggering of DTC P0656, including:

• Faulty engine temperature sensor
• Wiring issues, such as shorts or open circuits in the control circuit
• Defective engine control module (ECM)
• Corroded or loose connectors in the circuit
• Malfunctioning engine hot lamp

DTC P0656 seriousness

DTC P0656 can be considered serious as it may indicate potential overheating of the engine, which can lead to severe engine damage if not addressed promptly. The warning light serves as a critical alert for the driver, and ignoring it could result in costly repairs or engine failure.

How to diagnose DTC P0656

To diagnose DTC P0656, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P0656.
2. Inspect the engine temperature sensor and its wiring for damage or corrosion.
3. Check the engine control module (ECM) for any software updates or faults.
4. Test the engine hot lamp for proper operation.
5. Perform a continuity test on the control circuit wiring.

How to fix DTC P0656 step-by-step instructions

To fix DTC P0656, follow these step-by-step instructions:

1. Identify and repair any damaged wiring or connectors in the engine hot lamp output control circuit.
2. Replace the engine temperature sensor if it is found to be faulty.
3. Test and replace the engine control module (ECM) if necessary.
4. Ensure the engine hot lamp is functioning correctly replace it if defective.
5. Clear the DTC using an OBD-II scanner and perform a test drive to verify the issue is resolved.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.