P0706 – OBD-II DTC

OBD-II DTC P0706 – Transmission Range Sensor Circuit malfunction (PRNDL Input)

DTC P0706 meaning

DTC P0706 refers to a malfunction in the Transmission Range Sensor Circuit, specifically related to the PRNDL (Park, Reverse, Neutral, Drive, Low) input. This sensor is responsible for indicating the current gear selection of the transmission to the Engine Control Module (ECM). When the ECM detects an issue with the signal from the transmission range sensor, it triggers the P0706 code.

DTC P0706 symptoms

Common symptoms associated with DTC P0706 may include:

• Illuminated check engine light
• Transmission not shifting properly
• Inability to shift into certain gears
• Unexpected gear changes
• Vehicle may go into limp mode

DTC P0706 causes

Several factors can lead to the P0706 code, including:

• Faulty transmission range sensor
• Wiring issues or damaged connectors in the sensor circuit
• Faulty Engine Control Module (ECM)
• Low transmission fluid levels
• Mechanical issues within the transmission

DTC P0706 seriousness

The seriousness of DTC P0706 can vary, but it is generally considered a moderate issue. If left unaddressed, it can lead to:

• Increased wear and tear on the transmission
• Potential for complete transmission failure
• Safety risks due to unexpected vehicle behavior

How to diagnose DTC P0706

To diagnose DTC P0706, follow these steps:

1. Use an OBD-II scanner to confirm the P0706 code and check for any additional codes.
2. Inspect the transmission range sensor and its wiring for any visible damage or corrosion.
3. Test the voltage and ground at the sensor connector to ensure proper operation.
4. Check the transmission fluid level and condition.
5. Perform a continuity test on the wiring between the sensor and the ECM.
6. If necessary, replace the transmission range sensor and clear the codes.

How to fix DTC P0706 step-by-step instructions

To fix DTC P0706, follow these step-by-step instructions:

1. Gather necessary tools: OBD-II scanner, multimeter, and basic hand tools.
2. Disconnect the battery to ensure safety while working on the electrical system.
3. Locate the transmission range sensor and inspect it for damage or wear.
4. Check the wiring and connectors for any signs of corrosion or breaks.
5. Use a multimeter to test the sensor’s resistance and voltage output according to manufacturer specifications.
6. If the sensor is faulty, replace it with a new one.
7. Reconnect all connectors and the battery.
8. Start the vehicle and use the OBD-II scanner to clear the DTC.
9. Test drive the vehicle to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P0706

To erase DTC P0706, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to read or clear trouble codes.
4. Follow the prompts to erase the P0706 code from the ECM.
5. Disconnect the scanner and start the vehicle to verify that the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.