P0714 – OBD-II DTC

OBD-II DTC P0714 – Transmission Fluid Temperature Sensor Circuit High Input

DTC P0714 meaning

DTC P0714 refers to a diagnostic trouble code that indicates a high input signal from the transmission fluid temperature sensor circuit. This sensor is responsible for monitoring the temperature of the transmission fluid, which is crucial for optimal transmission performance. A high input signal suggests that the sensor is detecting a temperature that exceeds the normal operating range, which can lead to transmission issues if not addressed.

DTC P0714 symptoms

Common symptoms associated with DTC P0714 may include:

• Illuminated check engine light
• Transmission overheating
• Delayed or harsh shifting
• Reduced engine performance
• Transmission slipping or erratic behavior

DTC P0714 causes

Several factors can lead to the occurrence of DTC P0714, including:

• Faulty transmission fluid temperature sensor
• Wiring issues, such as short circuits or open circuits
• Corroded or loose electrical connections
• Faulty transmission control module (TCM)
• Low transmission fluid levels or contaminated fluid

DTC P0714 seriousness

DTC P0714 is considered a serious issue as it can lead to significant transmission problems if not resolved. Overheating transmission fluid can cause damage to internal components, leading to costly repairs. It is important to address this code promptly to prevent further complications and ensure the longevity of the transmission.

How to diagnose DTC P0714

To diagnose DTC P0714, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0714 code.
2. Inspect the transmission fluid level and condition.
3. Check the wiring and connectors related to the transmission fluid temperature sensor for damage or corrosion.
4. Test the resistance of the transmission fluid temperature sensor using a multimeter.
5. Verify the operation of the transmission control module (TCM) and check for any additional codes.

How to fix DTC P0714 step-by-step instructions

To fix DTC P0714, follow these step-by-step instructions:

1. Check and top off the transmission fluid if it is low.
2. Inspect and repair any damaged wiring or connectors related to the transmission fluid temperature sensor.
3. Replace the transmission fluid temperature sensor if it is found to be faulty.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the code does not return and monitor transmission performance.

How to erase DTC P0714

To erase DTC P0714, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.