P0719 – OBD-II DTC

OBD-II DTC P0719 – Input/Turbine Speed Sensor Circuit Intermittent

DTC P0719 meaning

DTC P0719 refers to an issue with the Input/Turbine Speed Sensor Circuit. This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an intermittent fault in the circuit that monitors the speed of the input or turbine shaft in the transmission. The input speed sensor is crucial for the proper functioning of the transmission, as it helps the ECM determine the appropriate gear and shift timing.

DTC P0719 symptoms

Common symptoms associated with DTC P0719 may include:

• Transmission slipping or erratic shifting
• Delayed engagement when shifting from park to drive or reverse
• Check Engine Light illuminated
• Reduced fuel efficiency
• Unusual engine RPM fluctuations

DTC P0719 causes

Several factors can lead to the occurrence of DTC P0719, including:

• Faulty input/turbine speed sensor
• Wiring issues such as frayed or damaged wires
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Transmission fluid issues, such as low fluid levels or contamination

DTC P0719 seriousness

DTC P0719 is considered a serious issue as it can affect the transmission’s performance and overall vehicle drivability. If left unaddressed, it may lead to further transmission damage, increased repair costs, and potential safety hazards while driving. It is advisable to diagnose and repair the issue promptly to ensure safe and reliable vehicle operation.

How to diagnose DTC P0719

To diagnose DTC P0719, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0719 code.
2. Inspect the input/turbine speed sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connectors for secure connections and signs of wear.
4. Test the input/turbine speed sensor using a multimeter to ensure it is functioning within specifications.
5. Examine the transmission fluid level and condition, replacing it if necessary.
6. Clear the code and take the vehicle for a test drive to see if the code reappears.

How to fix DTC P0719 step-by-step instructions

To fix DTC P0719, follow these step-by-step instructions:

1. Gather necessary tools, including a multimeter, OBD-II scanner, and basic hand tools.
2. Inspect the input/turbine speed sensor for any physical damage or signs of wear.
3. Check the wiring harness for frayed wires or loose connections, repairing or replacing as needed.
4. Test the input/turbine speed sensor with a multimeter to ensure it is within the manufacturer’s specifications.
5. If the sensor is faulty, replace it with a new one, ensuring proper installation.
6. Check the transmission fluid level and condition, topping off or replacing it if necessary.
7. Reconnect all electrical connectors securely and clear the DTC using an OBD-II scanner.
8. Take the vehicle for a test drive to confirm that the issue has been resolved and the code does not reappear.

How to erase DTC P0719

To erase DTC P0719, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Follow the prompts to clear the trouble codes from the ECM.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.