P0723 – OBD-II DTC

OBD-II DTC P0723 – Output Speed Sensor No Signal

DTC P0723 meaning

DTC P0723 refers to a diagnostic trouble code indicating that the Output Speed Sensor is not sending a signal to the Engine Control Module (ECM). This sensor is crucial for determining the vehicle’s speed and is typically located in the transmission. When the ECM does not receive a signal from this sensor, it triggers the P0723 code, indicating a malfunction in the speed sensing system.

DTC P0723 symptoms

Common symptoms associated with DTC P0723 may include:

• Illuminated check engine light
• Erratic or incorrect speedometer readings
• Transmission shifting issues, such as harsh or delayed shifts
• Reduced engine performance
• Potential for the vehicle to go into limp mode

DTC P0723 causes

Several factors can lead to the P0723 code being triggered, including:

• Faulty Output Speed Sensor
• Wiring issues, such as damaged or corroded connectors
• Faulty Engine Control Module (ECM)
• Transmission problems affecting sensor operation
• Poor electrical connections or shorts in the circuit

DTC P0723 seriousness

DTC P0723 is considered a serious issue as it can affect the vehicle’s transmission performance and overall drivability. If left unaddressed, it may lead to further transmission damage or failure, resulting in costly repairs. It is advisable to diagnose and resolve this code promptly to ensure safe and reliable vehicle operation.

How to diagnose DTC P0723

To diagnose DTC P0723, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0723 code.
2. Inspect the Output Speed Sensor and its wiring for any visible damage or corrosion.
3. Check the electrical connections to ensure they are secure and free of debris.
4. Test the Output Speed Sensor using a multimeter to verify its functionality.
5. Examine the ECM for any faults or updates that may be necessary.
6. Perform a road test to monitor the vehicle’s performance and check for any additional codes.

How to fix DTC P0723 step-by-step instructions

To fix DTC P0723, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors related to the Output Speed Sensor.
3. If the Output Speed Sensor is faulty, replace it with a new one.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Perform a road test to ensure the issue is resolved and the check engine light does not reappear.

How to erase DTC P0723

To erase DTC P0723, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.