P0725 – OBD-II DTC

OBD-II DTC P0725 – Torque Converter/Brake Switch B Circuit High

DTC P0725 meaning

DTC P0725 refers to a diagnostic trouble code indicating a problem with the Torque Converter/Brake Switch B Circuit. This code is triggered when the Engine Control Module (ECM) detects a high voltage signal in the circuit that is not within the expected range. The torque converter is responsible for transferring power from the engine to the transmission, and the brake switch is crucial for proper vehicle operation, especially in automatic transmissions.

DTC P0725 symptoms

Common symptoms associated with DTC P0725 may include:

• Illuminated check engine light
• Transmission shifting issues
• Unresponsive or erratic torque converter operation
• Reduced engine performance
• Increased fuel consumption

DTC P0725 causes

Several factors can lead to the triggering of DTC P0725, including:

• Faulty torque converter or brake switch
• Wiring issues such as shorts or open circuits
• Corroded or loose connectors in the circuit
• Faulty Engine Control Module (ECM)
• Transmission fluid issues

DTC P0725 seriousness

DTC P0725 is considered a moderate to serious issue. If left unaddressed, it can lead to:

• Transmission damage
• Increased wear on engine components
• Safety concerns due to erratic vehicle behavior
• Potential for more extensive and costly repairs

How to diagnose DTC P0725

To diagnose DTC P0725, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the wiring and connectors related to the torque converter and brake switch for damage or corrosion.
4. Test the torque converter and brake switch for proper operation using a multimeter.
5. Examine the ECM for any signs of failure or malfunction.

How to fix DTC P0725 step-by-step instructions

To fix DTC P0725, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. Replace the faulty torque converter or brake switch if necessary.
3. Ensure all connections are secure and free of corrosion.
4. Check and replace transmission fluid if it is low or contaminated.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P0725

To erase DTC P0725, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.