P0748 – OBD-II DTC

OBD-II DTC P0748 – Pressure Control Solenoid Stuck On

DTC P0748 meaning

DTC P0748 refers to a diagnostic trouble code indicating that the pressure control solenoid in the transmission is stuck in the “on” position. This solenoid is responsible for regulating the hydraulic pressure within the transmission, which is crucial for proper shifting and overall transmission performance. When the solenoid is stuck on, it can lead to excessive pressure, causing various transmission issues.

DTC P0748 symptoms

Common symptoms associated with DTC P0748 may include:

• Harsh or erratic shifting
• Delayed engagement when shifting from park to drive or reverse
• Transmission overheating
• Increased fuel consumption
• Check Engine Light illuminated

DTC P0748 causes

Several factors can contribute to the occurrence of DTC P0748, including:

• Faulty pressure control solenoid
• Wiring issues or short circuits in the solenoid circuit
• Low transmission fluid levels or dirty fluid
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC P0748 seriousness

DTC P0748 is considered a serious issue as it can lead to significant transmission problems if not addressed. Prolonged operation with this code can result in:

• Severe transmission damage
• Increased repair costs
• Loss of vehicle control

It is advisable to diagnose and repair the issue promptly to avoid further complications.

How to diagnose DTC P0748

To diagnose DTC P0748, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0748 code.
2. Inspect the transmission fluid level and condition.
3. Check the wiring and connectors related to the pressure control solenoid for damage or corrosion.
4. Test the pressure control solenoid for proper operation using a multimeter.
5. Examine the transmission control module for faults.
6. Perform a road test to observe transmission behavior.

How to fix DTC P0748 step-by-step instructions

To fix DTC P0748, follow these steps:

1. Check and top off the transmission fluid if low.
2. Replace the transmission fluid if it is dirty or burnt.
3. Repair or replace any damaged wiring or connectors related to the pressure control solenoid.
4. Replace the faulty pressure control solenoid if testing indicates it is not functioning correctly.
5. Reprogram or replace the transmission control module if necessary.
6. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC P0748

To erase DTC P0748, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.