P0751 – OBD-II DTC

OBD-II DTC P0751 – Shift Solenoid A Malfunction

DTC P0751 meaning

DTC P0751 refers to a malfunction in the Shift Solenoid A of the transmission system. The shift solenoid is an electromechanical device that controls the flow of transmission fluid, enabling the transmission to shift gears smoothly. When the Engine Control Module (ECM) detects an issue with this solenoid, it triggers the P0751 code, indicating that the solenoid is not functioning as intended.

DTC P0751 symptoms

Common symptoms associated with DTC P0751 may include:

• Delayed or harsh shifting between gears
• Transmission slipping or failing to engage
• Increased engine RPM without corresponding acceleration
• Check Engine Light illuminated on the dashboard
• Unusual noises from the transmission

DTC P0751 causes

Several factors can lead to the P0751 code being triggered, including:

• Faulty shift solenoid A
• Wiring issues or poor electrical connections
• Low transmission fluid levels or dirty fluid
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC P0751 seriousness

The seriousness of DTC P0751 can vary. While it may not cause immediate catastrophic failure, it can lead to significant transmission problems if left unaddressed. Symptoms like harsh shifting or slipping can affect vehicle safety and drivability. Therefore, it is advisable to diagnose and repair the issue promptly to avoid further damage to the transmission system.

How to diagnose DTC P0751

To diagnose DTC P0751, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0751 code.
2. Inspect the transmission fluid level and condition.
3. Check the wiring and connectors related to the shift solenoid A for damage or corrosion.
4. Test the shift solenoid A for proper operation using a multimeter.
5. Examine the transmission control module (TCM) for faults.
6. Perform a road test to observe the transmission behavior.

How to fix DTC P0751 step-by-step instructions

To fix DTC P0751, follow these steps:

1. Ensure the vehicle is safely lifted and supported if necessary.
2. Check and top off the transmission fluid if low.
3. Inspect and repair any damaged wiring or connectors related to the shift solenoid A.
4. Replace the faulty shift solenoid A if testing indicates it is malfunctioning.
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to ensure the issue is resolved and the transmission operates smoothly.

How to erase DTC P0751

To erase DTC P0751, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle.
6. Monitor for any reoccurrence of the P0751 code during subsequent driving.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.