P0752 – OBD-II DTC

OBD-II DTC P0752 – Shift Solenoid A Performance or Stuck Off/

DTC P0752 meaning

DTC P0752 refers to a diagnostic trouble code indicating a problem with the Shift Solenoid A in the transmission system. This code is triggered when the Engine Control Module (ECM) detects that the solenoid is either performing poorly or is stuck in the ‘off’ position. The shift solenoid is responsible for controlling the flow of transmission fluid, which is essential for proper gear shifting.

DTC P0752 symptoms

Common symptoms associated with DTC P0752 may include:

• Delayed or harsh shifting between gears
• Transmission slipping or failing to engage
• Check Engine Light illuminated
• Unusual noises from the transmission
• Reduced fuel efficiency

DTC P0752 causes

Several factors can lead to the triggering of DTC P0752, including:

• Faulty shift solenoid A
• Wiring issues or poor connections in the solenoid circuit
• Low transmission fluid levels or dirty fluid
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC P0752 seriousness

DTC P0752 is considered a serious issue as it can lead to significant transmission problems if not addressed. Ignoring this code may result in:

• Increased wear and tear on transmission components
• Complete transmission failure
• Unsafe driving conditions due to unpredictable shifting

How to diagnose DTC P0752

To diagnose DTC P0752, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0752 code.
2. Inspect the transmission fluid level and condition.
3. Check the wiring and connectors related to the shift solenoid A for damage or corrosion.
4. Test the shift solenoid A for proper operation using a multimeter.
5. Examine the transmission control module (TCM) for faults.

How to fix DTC P0752 step-by-step instructions

To fix DTC P0752, follow these steps:

1. Check and top off the transmission fluid if low.
2. Replace the transmission fluid if it is dirty or burnt.
3. Repair or replace any damaged wiring or connectors related to the shift solenoid A.
4. Replace the faulty shift solenoid A if testing indicates it is not functioning properly.
5. Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.

How to erase DTC P0752

To erase DTC P0752, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the ‘Erase Codes’ or ‘Clear DTCs’ option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.