P0757 – OBD-II DTC

OBD-II DTC P0757 – Shift Solenoid A Intermittent

DTC P0757 meaning

DTC P0757 refers to a problem with the Shift Solenoid A in the vehicle’s transmission system. The shift solenoid is responsible for controlling the flow of transmission fluid, which in turn affects the shifting of gears. An “intermittent” code indicates that the issue may not be constant and can occur sporadically, making it more challenging to diagnose.

DTC P0757 symptoms

Common symptoms associated with DTC P0757 may include:

• Delayed or harsh shifting between gears
• Transmission slipping or failing to engage
• Check Engine Light illuminated
• Unusual noises from the transmission
• Reduced fuel efficiency

DTC P0757 causes

Several factors can lead to the triggering of DTC P0757, including:

• Faulty shift solenoid A
• Wiring issues or poor connections in the solenoid circuit
• Low transmission fluid levels or contamination
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC P0757 seriousness

The seriousness of DTC P0757 can vary. While it may not cause immediate catastrophic failure, it can lead to significant transmission problems if left unaddressed. Symptoms like harsh shifting or slipping can affect vehicle safety and drivability, making it important to diagnose and repair the issue promptly.

How to diagnose DTC P0757

To diagnose DTC P0757, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any related codes.
2. Inspect the transmission fluid level and condition.
3. Examine the wiring and connectors related to the shift solenoid A for damage or corrosion.
4. Test the shift solenoid A for proper operation using a multimeter.
5. Check the transmission control module for faults or updates.
6. Perform a road test to observe the transmission behavior.

How to fix DTC P0757 step-by-step instructions

To fix DTC P0757, follow these steps:

1. Address any low or contaminated transmission fluid by replacing it and ensuring proper levels.
2. Repair or replace any damaged wiring or connectors related to the shift solenoid A.
3. If the shift solenoid A is faulty, replace it with a new one.
4. Reprogram or replace the transmission control module if necessary.
5. Clear the DTC using an OBD-II scanner and perform a road test to ensure the issue is resolved.

How to erase DTC P0757

To erase DTC P0757, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.