P0775 – OBD-II DTC

OBD-II DTC P0775 – Shift Solenoid E Performance or Stuck Off

DTC P0775 meaning

DTC P0775 refers to a diagnostic trouble code indicating an issue with the Shift Solenoid E in the vehicle’s transmission system. This code is triggered when the Engine Control Module (ECM) detects that the solenoid is either not performing as expected or is stuck in the ‘off’ position. The shift solenoid is responsible for controlling the flow of transmission fluid, which is essential for proper gear shifting.

DTC P0775 symptoms

Common symptoms associated with DTC P0775 may include:

• Delayed or harsh shifting between gears
• Transmission slipping or failing to engage
• Increased engine RPM without corresponding vehicle speed
• Check Engine Light illuminated on the dashboard
• Unusual noises from the transmission

DTC P0775 causes

Several factors can lead to the triggering of DTC P0775, including:

• Faulty shift solenoid E
• Wiring issues or poor electrical connections
• Low transmission fluid levels or contamination
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC P0775 seriousness

DTC P0775 can be considered serious as it directly affects the vehicle’s transmission performance. If left unaddressed, it may lead to further transmission damage, reduced drivability, and potentially unsafe driving conditions. It is advisable to diagnose and repair the issue promptly to avoid costly repairs and ensure safe operation of the vehicle.

How to diagnose DTC P0775

To diagnose DTC P0775, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0775 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the transmission fluid level and condition.
4. Examine the wiring and connectors related to the shift solenoid E for damage or corrosion.
5. Test the shift solenoid E for proper operation using a multimeter.
6. Check the transmission control module (TCM) for faults.

How to fix DTC P0775 step-by-step instructions

To fix DTC P0775, follow these steps:

1. Ensure the vehicle is safely lifted and supported if necessary.
2. Check and replace the transmission fluid if it is low or contaminated.
3. Repair or replace any damaged wiring or connectors related to the shift solenoid E.
4. Replace the faulty shift solenoid E if testing indicates it is not functioning properly.
5. Clear any stored trouble codes using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and monitor for any reoccurrence of the code.

How to erase DTC P0775

To erase DTC P0775, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the ‘On’ position without starting the engine.
3. Access the ‘Erase Codes’ or ‘Clear Codes’ function on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.