P0782 – OBD-II DTC

OBD-II DTC P0782 – Pressure Control Solenoid B Electrical

DTC P0782 meaning

DTC P0782 refers to a problem with the Pressure Control Solenoid B in the transmission system. This code indicates that the Engine Control Module (ECM) has detected an electrical issue with the solenoid responsible for regulating hydraulic pressure within the transmission. Proper functioning of this solenoid is crucial for optimal transmission performance and shifting quality.

DTC P0782 symptoms

Common symptoms associated with DTC P0782 may include:

• Delayed or harsh shifting between gears
• Transmission slipping or failing to engage
• Increased engine RPM without corresponding vehicle speed
• Check Engine Light illuminated
• Unusual noises from the transmission

DTC P0782 causes

Several factors can lead to the triggering of DTC P0782, including:

• Faulty Pressure Control Solenoid B
• Wiring issues such as shorts, opens, or corrosion in the electrical connectors
• Low transmission fluid levels or dirty fluid
• Faulty Transmission Control Module (TCM)
• Mechanical issues within the transmission

DTC P0782 seriousness

DTC P0782 is considered a serious issue as it can lead to significant transmission problems. If left unaddressed, it may result in:

• Increased wear and tear on transmission components
• Complete transmission failure
• Unsafe driving conditions due to unpredictable shifting

How to diagnose DTC P0782

To diagnose DTC P0782, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0782 code.
2. Inspect the transmission fluid level and condition.
3. Check the wiring and connectors related to the Pressure Control Solenoid B for damage or corrosion.
4. Test the Pressure Control Solenoid B for proper operation using a multimeter.
5. Examine the Transmission Control Module (TCM) for faults.
6. Perform a road test to observe transmission behavior.

How to fix DTC P0782 step-by-step instructions

To fix DTC P0782, follow these steps:

1. Check and top off the transmission fluid if low.
2. Replace the transmission fluid if it is dirty or contaminated.
3. Inspect and repair any damaged wiring or connectors related to the Pressure Control Solenoid B.
4. Replace the faulty Pressure Control Solenoid B if testing indicates it is not functioning properly.
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to ensure the issue is resolved and the code does not return.

How to erase DTC P0782

To erase DTC P0782, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the “Erase Codes” or “Clear Codes” function on the scanner.
4. Confirm the action to clear the DTC.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.