P0783 – OBD-II DTC

OBD-II DTC P0783 – Pressure Control Solenoid B Intermittent

DTC P0783 meaning

DTC P0783 refers to an issue with the pressure control solenoid B in the transmission system. This code indicates that the solenoid is experiencing intermittent performance problems, which can affect the transmission’s ability to shift gears properly. The pressure control solenoid is responsible for regulating the hydraulic pressure within the transmission, ensuring smooth operation and optimal performance.

DTC P0783 symptoms

Common symptoms associated with DTC P0783 may include:

• Harsh or erratic shifting
• Delayed engagement when shifting from park to drive or reverse
• Slipping transmission
• Check Engine Light illuminated
• Reduced fuel efficiency

DTC P0783 causes

Several factors can contribute to the occurrence of DTC P0783, including:

• Faulty pressure control solenoid B
• Wiring issues or poor connections in the solenoid circuit
• Low transmission fluid levels or contaminated fluid
• Faulty transmission control module (TCM)
• Mechanical issues within the transmission

DTC P0783 seriousness

DTC P0783 can be considered a serious issue as it directly impacts the transmission’s performance. If left unaddressed, it may lead to further transmission damage, increased repair costs, and potential safety hazards while driving. It is advisable to diagnose and repair the issue promptly to ensure safe and reliable vehicle operation.

How to diagnose DTC P0783

To diagnose DTC P0783, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0783 code.
2. Check for any additional DTCs that may provide more context.
3. Inspect the transmission fluid level and condition.
4. Examine the wiring and connectors related to the pressure control solenoid B for damage or corrosion.
5. Test the pressure control solenoid B for proper operation using a multimeter.
6. Check the transmission control module (TCM) for faults.
7. Perform a road test to observe the transmission behavior.

How to fix DTC P0783 step-by-step instructions

To fix DTC P0783, follow these steps:

1. Address any low or contaminated transmission fluid by replacing it and ensuring proper levels.
2. Repair or replace any damaged wiring or connectors related to the pressure control solenoid B.
3. If the pressure control solenoid B is faulty, replace it with a new one.
4. Check and, if necessary, replace the transmission control module (TCM).
5. Clear the DTC using an OBD-II scanner.
6. Perform a road test to ensure the issue is resolved and monitor for any reoccurrence of the code.

How to erase DTC P0783

To erase DTC P0783, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle.
6. Monitor the vehicle for any reappearance of the P0783 code during subsequent driving.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.