P1103 – OBD-II DTC

OBD-II DTC P1103 – 1-4 Upshift (Skip Shift) Lamp Control Circuit Malfunction

DTC P1103 meaning

DTC P1103 refers to a malfunction in the 1-4 upshift (skip shift) lamp control circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the circuit responsible for signaling the driver when to skip certain gears during shifting. This feature is designed to improve fuel efficiency by encouraging the driver to shift to higher gears sooner.

DTC P1103 symptoms

Common symptoms associated with DTC P1103 may include:

• Illuminated check engine light
• Inconsistent or erratic shifting behavior
• Reduced fuel efficiency
• Driver notification of skip shift feature not functioning

DTC P1103 causes

Several factors can lead to the triggering of DTC P1103, including:

• Faulty skip shift solenoid
• Wiring issues in the control circuit
• Corroded or damaged connectors
• Faulty engine control module (ECM)
• Software issues within the vehicle’s control system

DTC P1103 seriousness

The seriousness of DTC P1103 can vary. While it may not pose an immediate safety risk, it can lead to:

• Decreased fuel efficiency
• Increased wear on the transmission
• Potential for further transmission-related issues if left unaddressed

It is advisable to diagnose and repair the issue to maintain optimal vehicle performance.

How to diagnose DTC P1103

To diagnose DTC P1103, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1103.
2. Inspect the skip shift solenoid for proper operation.
3. Check the wiring and connectors for damage or corrosion.
4. Test the voltage and ground at the skip shift solenoid.
5. Examine the engine control module for any software updates or faults.

How to fix DTC P1103 step-by-step instructions

To fix DTC P1103, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the skip shift circuit.
3. Replace the skip shift solenoid if it is found to be faulty.
4. Update the engine control module software if necessary.
5. Recheck the system for any new or recurring DTCs after repairs.

How to erase DTC P1103

To erase DTC P1103, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.