P1105 – OBD-II DTC

OBD-II DTC P1105 – MAF Sensor Out Of Self Test Range./

DTC P1105 meaning

DTC P1105 refers to a diagnostic trouble code indicating that the Mass Air Flow (MAF) sensor is out of self-test range. This code is triggered when the Engine Control Module (ECM) detects that the MAF sensor’s output is not within the expected parameters during a self-test. The MAF sensor measures the amount of air entering the engine, which is crucial for proper fuel management and engine performance.

DTC P1105 symptoms

Common symptoms associated with DTC P1105 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Increased fuel consumption
• Rough idling or stalling
• Difficulty starting the engine

DTC P1105 causes

Several factors can lead to the triggering of DTC P1105, including:

• Faulty MAF sensor
• Wiring issues or poor connections in the MAF sensor circuit
• Vacuum leaks in the intake system
• Contaminated or dirty MAF sensor
• Faulty ECM or software issues

DTC P1105 seriousness

DTC P1105 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to poor engine performance, increased emissions, and potential damage to other engine components if not addressed. It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance and efficiency.

How to diagnose DTC P1105

To diagnose DTC P1105, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1105 code.
2. Inspect the MAF sensor and its wiring for any visible damage or disconnections.
3. Check for vacuum leaks in the intake system.
4. Test the MAF sensor using a multimeter to ensure it is functioning within specifications.
5. Examine the ECM for any software updates or faults.

How to fix DTC P1105 step-by-step instructions

To fix DTC P1105, follow these steps:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the MAF sensor.
3. Replace the MAF sensor if it is found to be faulty.
4. Fix any vacuum leaks in the intake system.
5. Recheck the system for any additional codes after repairs.
6. Test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1105

To erase DTC P1105, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.