P1114 – OBD-II DTC

OBD-II DTC P1114 – IAT – B Sensor Intermittent

DTC P1114 meaning

DTC P1114 refers to an issue with the Intake Air Temperature (IAT) sensor B, indicating that the sensor is experiencing intermittent faults. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various components of the vehicle to ensure optimal performance and emissions control. The IAT sensor measures the temperature of the air entering the engine, which is crucial for proper fuel mixture and engine performance.

DTC P1114 symptoms

Common symptoms associated with DTC P1114 may include:

• Check Engine Light illuminated
• Poor engine performance
• Decreased fuel efficiency
• Rough idling or stalling
• Increased emissions

DTC P1114 causes

Several factors can lead to the triggering of DTC P1114, including:

• Faulty IAT sensor B
• Wiring issues, such as frayed or shorted wires
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Air intake leaks

DTC P1114 seriousness

The seriousness of DTC P1114 can vary. While it may not cause immediate catastrophic failure, it can lead to:

• Reduced engine performance
• Poor fuel economy
• Increased emissions, potentially failing emissions tests

It is advisable to address this code promptly to avoid further complications.

How to diagnose DTC P1114

To diagnose DTC P1114, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1114 code.
2. Inspect the IAT sensor B and its wiring for any visible damage.
3. Check the electrical connectors for corrosion or looseness.
4. Test the IAT sensor with a multimeter to ensure it is functioning within specifications.
5. Examine the air intake system for leaks or blockages.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P1114 step-by-step instructions

To fix DTC P1114, follow these steps:

1. Identify and replace the faulty IAT sensor B if necessary.
2. Repair or replace any damaged wiring or connectors associated with the IAT sensor.
3. Ensure all connections are secure and free from corrosion.
4. Inspect and repair any air intake leaks.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to confirm that the issue is resolved and the code does not return.

How to erase DTC P1114

To erase DTC P1114, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.