P1125 – OBD-II DTC

OBD-II DTC P1125 – Throttle position sensor out of range

DTC P1125 meaning

DTC P1125 refers to a diagnostic trouble code indicating that the throttle position sensor (TPS) is out of range. The TPS is a critical component in the vehicle’s engine management system, providing feedback on the position of the throttle plate to the engine control unit (ECU). When the TPS readings fall outside the expected range, it can lead to improper engine performance and drivability issues.

DTC P1125 symptoms

Common symptoms associated with DTC P1125 may include:

• Check Engine Light illuminated
• Unresponsive or erratic throttle response
• Engine stalling or hesitation during acceleration
• Reduced engine power or performance
• Increased fuel consumption

DTC P1125 causes

Several factors can lead to the triggering of DTC P1125, including:

• Faulty throttle position sensor
• Wiring issues or poor connections in the TPS circuit
• Malfunctioning engine control unit (ECU)
• Mechanical issues with the throttle body
• Vacuum leaks affecting the air intake

DTC P1125 seriousness

DTC P1125 is considered a serious issue as it can significantly affect vehicle performance and drivability. If left unaddressed, it may lead to further engine damage or safety concerns while driving. It is advisable to diagnose and repair the issue promptly to ensure safe operation of the vehicle.

How to diagnose DTC P1125

To diagnose DTC P1125, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P1125.
2. Inspect the throttle position sensor and its wiring for any visible damage or disconnections.
3. Check the TPS voltage readings with a multimeter to ensure they are within the manufacturer’s specifications.
4. Examine the throttle body for any mechanical issues, such as sticking or binding.
5. Perform a visual inspection for vacuum leaks in the intake system.
6. Clear the DTC and take the vehicle for a test drive to see if the code reappears.

How to fix DTC P1125 step-by-step instructions

To fix DTC P1125, follow these steps:

1. Identify and repair any wiring issues or poor connections in the TPS circuit.
2. If the throttle position sensor is faulty, replace it with a new one.
3. Clean the throttle body to ensure smooth operation of the throttle plate.
4. Check and repair any vacuum leaks in the intake system.
5. Recheck the TPS voltage readings to confirm they are within specifications.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify the repair.

How to erase DTC P1125

To erase DTC P1125, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.