P1126 – OBD-II DTC

OBD-II DTC P1126 – Throttle Position (TP) Sensor Circuit Intermittent High Voltage

DTC P1126 meaning

DTC P1126 refers to a diagnostic trouble code indicating an intermittent high voltage condition in the Throttle Position (TP) Sensor circuit. The TP sensor is crucial for monitoring the position of the throttle plate, which directly affects engine performance and fuel efficiency. When the voltage reading from the TP sensor is higher than expected, it can trigger this code, signaling a potential issue in the sensor or its circuit.

DTC P1126 symptoms

Common symptoms associated with DTC P1126 may include:

• Check Engine Light (CEL) illuminated
• Unstable or erratic engine idle
• Reduced engine performance or power loss
• Increased fuel consumption
• Difficulty in acceleration

DTC P1126 causes

Several factors can lead to the triggering of DTC P1126, including:

• Faulty Throttle Position Sensor
• Wiring issues such as frayed or damaged wires
• Corroded or loose electrical connectors
• Faulty Engine Control Module (ECM)
• Intermittent electrical connections

DTC P1126 seriousness

DTC P1126 can be considered serious as it may affect the vehicle’s drivability and overall performance. If left unaddressed, it can lead to further engine issues, increased emissions, and potential damage to other components. It is advisable to diagnose and resolve the issue promptly to ensure safe and efficient vehicle operation.

How to diagnose DTC P1126

To diagnose DTC P1126, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1126 code.
2. Inspect the Throttle Position Sensor and its wiring for visible damage or corrosion.
3. Check the electrical connectors for secure connections and signs of wear.
4. Test the voltage output of the TP sensor using a multimeter.
5. Compare the readings with manufacturer specifications to determine if the sensor is functioning correctly.
6. Inspect the Engine Control Module (ECM) for any faults or updates.

How to fix DTC P1126 step-by-step instructions

To fix DTC P1126, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors related to the TP sensor.
3. If the TP sensor is faulty, replace it with a new one.
4. Reconnect all electrical connections securely.
5. Reconnect the battery and start the engine to check for any remaining issues.
6. Use the OBD-II scanner to clear the DTC and monitor for reoccurrence.

How to erase DTC P1126

To erase DTC P1126, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.