P1130 – OBD-II DTC

OBD-II DTC P1130 – Throttle position sensor intermittent

DTC P1130 meaning

DTC P1130 refers to an intermittent issue with the throttle position sensor (TPS). The throttle position sensor is a critical component that monitors the position of the throttle plate in the engine. This data is sent to the engine control module (ECM) to help manage fuel injection and ignition timing. An intermittent fault indicates that the sensor may be functioning erratically, leading to inconsistent readings that can affect engine performance.

DTC P1130 symptoms

Common symptoms associated with DTC P1130 may include:

• Check Engine Light (CEL) illuminated
• Unstable or erratic engine idle
• Reduced engine power or acceleration
• Stalling or hesitation during acceleration
• Poor fuel economy

DTC P1130 causes

Several factors can lead to the P1130 code, including:

• Faulty throttle position sensor
• Wiring issues or poor connections in the TPS circuit
• Corrosion or damage to the sensor connector
• Vacuum leaks affecting the throttle response
• ECM software issues or faults

DTC P1130 seriousness

The seriousness of DTC P1130 can vary. While it may not cause immediate catastrophic failure, it can lead to:

• Decreased engine performance
• Increased emissions
• Potential for further damage if left unaddressed

It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance and compliance with emissions standards.

How to diagnose DTC P1130

To diagnose DTC P1130, follow these steps:

1. Use an OBD-II scanner to confirm the P1130 code and check for any additional codes.
2. Inspect the throttle position sensor and its wiring for visible damage or corrosion.
3. Test the TPS with a multimeter to ensure it is providing the correct voltage readings.
4. Check for vacuum leaks around the throttle body and intake manifold.
5. Examine the ECM for any software updates or faults.

How to fix DTC P1130 step-by-step instructions

To fix DTC P1130, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the throttle position sensor.
3. If the TPS is faulty, replace it with a new sensor.
4. Clear any vacuum leaks by replacing damaged hoses or gaskets.
5. Reconnect the battery and start the engine to check for proper operation.
6. Use the OBD-II scanner to clear the DTC and monitor for reoccurrence.

How to erase DTC P1130

To erase DTC P1130, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the “Erase Codes” function on the scanner.
4. Confirm the action to clear the DTC from the ECM.
5. Start the engine and monitor for any reoccurrence of the code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.