P1132 – OBD-II DTC

OBD-II DTC P1132 – Exhaust Not Warm

DTC P1132 meaning

DTC P1132 refers to a diagnostic trouble code indicating that the exhaust system is not reaching the expected temperature within a specified time frame. This code is typically associated with the oxygen sensor’s performance, particularly in relation to the exhaust system’s ability to heat up properly. The code suggests that the engine control module (ECM) has detected a discrepancy between the expected and actual exhaust temperature readings.

DTC P1132 symptoms

Common symptoms associated with DTC P1132 may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough engine idle
• Increased emissions
• Potential engine performance issues

DTC P1132 causes

Several factors can lead to the triggering of DTC P1132, including:

• Faulty oxygen sensor
• Exhaust leaks
• Insufficient exhaust flow
• Faulty engine coolant temperature sensor
• Wiring issues or poor connections in the exhaust temperature sensor circuit
• Malfunctioning catalytic converter

DTC P1132 seriousness

The seriousness of DTC P1132 can vary depending on the underlying cause. While it may not immediately affect vehicle drivability, it can lead to:

• Increased emissions, which may cause the vehicle to fail emissions testing
• Potential damage to the engine or exhaust components if left unaddressed
• Decreased fuel efficiency, leading to higher operating costs

How to diagnose DTC P1132

To diagnose DTC P1132, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1132 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the oxygen sensor and its wiring for damage or corrosion.
4. Examine the exhaust system for leaks or blockages.
5. Test the engine coolant temperature sensor for proper operation.
6. Perform a visual inspection of the catalytic converter for signs of failure.
7. Conduct a road test to monitor exhaust temperature readings.

How to fix DTC P1132 step-by-step instructions

To fix DTC P1132, follow these step-by-step instructions:

1. Address any exhaust leaks by repairing or replacing damaged components.
2. Replace a faulty oxygen sensor if testing indicates it is not functioning correctly.
3. Repair or replace damaged wiring or connectors in the oxygen sensor circuit.
4. Replace the engine coolant temperature sensor if it is found to be faulty.
5. Inspect and, if necessary, replace the catalytic converter if it is malfunctioning.
6. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the code does not return.

How to erase DTC P1132

To erase DTC P1132, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.