P1136 – OBD-II DTC

OBD-II DTC P1136 – Lack Of HO2S Switch – Sensor Indicates Lean

DTC P1136 meaning

The DTC P1136 code indicates a problem with the heated oxygen sensor (HO2S) in the vehicle’s exhaust system. Specifically, it signifies that the sensor is reporting a lean condition, meaning that the air-fuel mixture is too rich in oxygen. This can lead to inefficient engine performance and increased emissions.

DTC P1136 symptoms

Common symptoms associated with the P1136 code may include:

• Check Engine Light illuminated
• Decreased fuel efficiency
• Rough idling or stalling
• Increased emissions
• Poor engine performance or hesitation during acceleration

DTC P1136 causes

Several factors can trigger the P1136 code, including:

• Faulty heated oxygen sensor
• Exhaust leaks before the sensor
• Vacuum leaks in the intake system
• Fuel delivery issues, such as a clogged fuel filter or failing fuel pump
• Faulty engine control module (ECM)

DTC P1136 seriousness

The seriousness of the P1136 code can vary. While it may not cause immediate engine failure, it can lead to:

• Increased fuel consumption
• Higher emissions, potentially failing emissions tests
• Long-term engine damage if not addressed

It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P1136

To diagnose the P1136 code, follow these steps:

1. Use an OBD-II scanner to confirm the P1136 code and check for any additional codes.
2. Inspect the wiring and connectors of the heated oxygen sensor for damage or corrosion.
3. Check for exhaust leaks before the sensor.
4. Test the heated oxygen sensor using a multimeter to ensure it is functioning correctly.
5. Inspect the intake system for vacuum leaks.
6. Evaluate fuel delivery components for proper operation.

How to fix DTC P1136 step-by-step instructions

To fix the P1136 code, follow these steps:

1. Repair or replace any damaged wiring or connectors related to the heated oxygen sensor.
2. Fix any exhaust leaks found during the diagnosis.
3. Replace the faulty heated oxygen sensor if testing indicates it is not functioning properly.
4. Address any vacuum leaks in the intake system.
5. Ensure the fuel delivery system is operating correctly, replacing components as necessary.
6. Clear the DTC using an OBD-II scanner and test drive the vehicle to see if the code returns.

How to erase DTC P1136

To erase the P1136 code, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.