P1153 – OBD-II DTC

OBD-II DTC P1153 – Air Assist Control Valve Range/Performance

DTC P1153 meaning

DTC P1153 refers to a problem with the Air Assist Control Valve, specifically indicating a range or performance issue. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various components of the vehicle’s engine and emissions systems. The Air Assist Control Valve is responsible for regulating air flow to the engine, and when it fails to operate within the expected parameters, this diagnostic trouble code is triggered.

DTC P1153 symptoms

Common symptoms associated with DTC P1153 may include:

• Check Engine Light illuminated
• Decreased engine performance
• Increased fuel consumption
• Rough idling or stalling
• Unusual engine noises

DTC P1153 causes

Several factors can lead to the triggering of DTC P1153, including:

• Faulty Air Assist Control Valve
• Wiring issues or poor connections in the valve circuit
• Vacuum leaks affecting air flow
• Faulty engine control module (ECM)
• Contaminated or damaged sensors related to air intake

DTC P1153 seriousness

The seriousness of DTC P1153 can vary based on the underlying issue. While it may not cause immediate catastrophic failure, it can lead to:

• Increased emissions
• Reduced fuel efficiency
• Potential damage to the engine over time
• Failure to pass emissions testing

It is advisable to address this code promptly to avoid further complications.

How to diagnose DTC P1153

To diagnose DTC P1153, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1153 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the Air Assist Control Valve and its wiring for visible damage or disconnections.
4. Test the valve’s operation using a multimeter to check for proper voltage and resistance.
5. Examine the vacuum lines for leaks or blockages.
6. Review the vehicle’s service history for any recent repairs that may relate to the issue.

How to fix DTC P1153 step-by-step instructions

To fix DTC P1153, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Perform a visual inspection of the Air Assist Control Valve and wiring.
3. If damaged, replace the Air Assist Control Valve.
4. Repair or replace any faulty wiring or connectors.
5. Check and repair any vacuum leaks in the intake system.
6. Recheck the system by starting the engine and monitoring for any new codes.
7. Test drive the vehicle to ensure the issue is resolved.

How to erase DTC P1153

To erase DTC P1153 from the vehicle’s computer, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear Codes” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.