P1154 – OBD-II DTC

OBD-II DTC P1154 – Air Assist Control Valve Circuit Malfunction

DTC P1154 meaning

DTC P1154 refers to a malfunction in the Air Assist Control Valve Circuit. This code indicates that the Engine Control Module (ECM) has detected an issue with the air assist control valve, which is responsible for regulating air flow in the engine’s intake system. The air assist control valve plays a crucial role in optimizing engine performance and emissions control.

DTC P1154 symptoms

Common symptoms associated with DTC P1154 may include:

• Check Engine Light illuminated
• Decreased engine performance
• Increased fuel consumption
• Rough idling or stalling
• Failed emissions test

DTC P1154 causes

Several factors can lead to the triggering of DTC P1154, including:

• Faulty air assist control valve
• Wiring issues or damaged connectors in the circuit
• Short circuits or open circuits in the air assist control valve circuit
• Faulty Engine Control Module (ECM)
• Vacuum leaks in the intake system

DTC P1154 seriousness

DTC P1154 can be considered serious as it may affect engine performance and emissions. If left unaddressed, it can lead to further engine damage or increased emissions, which may result in failing an emissions test. It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC P1154

To diagnose DTC P1154, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1154 code.
2. Inspect the air assist control valve and its wiring for any visible damage or disconnections.
3. Check for vacuum leaks in the intake system.
4. Test the air assist control valve for proper operation using a multimeter.
5. Examine the Engine Control Module (ECM) for any faults or updates.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC P1154 step-by-step instructions

To fix DTC P1154, follow these step-by-step instructions:

1. Disconnect the negative battery terminal to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the air assist control valve.
3. Replace the air assist control valve if it is found to be faulty.
4. Check and repair any vacuum leaks in the intake system.
5. Reconnect the negative battery terminal.
6. Use an OBD-II scanner to clear the DTC and reset the check engine light.
7. Perform a test drive to ensure the issue is resolved and the code does not return.

How to erase DTC P1154

To erase DTC P1154, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and turn off the ignition.
6. Start the engine and monitor for any reoccurrence of the code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.