P1182 – OBD-II DTC

OBD-II DTC P1182 – Cam Calibration Fault

DTC P1182 meaning

DTC P1182 refers to a “Cam Calibration Fault.” This diagnostic trouble code indicates that the Engine Control Module (ECM) has detected an issue with the camshaft position sensor or the camshaft timing. The camshaft plays a crucial role in controlling the timing of the engine’s intake and exhaust valves, and any discrepancies can lead to performance issues.

DTC P1182 symptoms

Common symptoms associated with DTC P1182 may include:

• Check Engine Light illuminated
• Rough idling or stalling
• Decreased engine performance
• Poor fuel economy
• Difficulty starting the engine

DTC P1182 causes

Several factors can contribute to the occurrence of DTC P1182, including:

• Faulty camshaft position sensor
• Wiring issues or poor connections in the camshaft sensor circuit
• Timing chain or belt problems
• Faulty Engine Control Module (ECM)
• Mechanical issues within the engine affecting camshaft operation

DTC P1182 seriousness

DTC P1182 can be considered serious as it may lead to significant engine performance issues. If left unaddressed, it can result in:

• Increased emissions
• Potential engine damage
• Failure to pass emissions tests
• Reduced drivability and safety concerns

How to diagnose DTC P1182

To diagnose DTC P1182, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1182 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the camshaft position sensor and its wiring for damage or disconnections.
4. Test the camshaft position sensor using a multimeter to ensure it is functioning correctly.
5. Examine the timing chain or belt for wear or misalignment.
6. Check the ECM for any software updates or faults.

How to fix DTC P1182 step-by-step instructions

To fix DTC P1182, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors related to the camshaft position sensor.
3. If the camshaft position sensor is faulty, replace it with a new one.
4. Check and replace the timing chain or belt if necessary.
5. Reprogram or replace the ECM if it is determined to be faulty.
6. After repairs, clear the codes again and take the vehicle for a test drive to ensure the issue is resolved.

How to erase DTC P1182

To erase DTC P1182, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.