P1185 – OBD-II DTC

OBD-II DTC P1185 – Fuel Delivery System Malfunction – Low

DTC P1185 meaning

DTC P1185 refers to a diagnostic trouble code indicating a malfunction in the fuel delivery system, specifically a low fuel delivery condition. This code is triggered when the Engine Control Module (ECM) detects that the fuel pressure is below the expected range, which can lead to insufficient fuel supply to the engine. This issue can affect engine performance, fuel efficiency, and emissions control.

DTC P1185 symptoms

Common symptoms associated with DTC P1185 may include:

• Engine stalling or hesitation during acceleration
• Reduced engine power or performance
• Difficulty starting the engine
• Check Engine Light (CEL) illuminated
• Poor fuel economy

DTC P1185 causes

Several factors can contribute to the triggering of DTC P1185, including:

• Faulty fuel pump
• Clogged fuel filter
• Leaking fuel lines or connections
• Defective fuel pressure regulator
• Faulty fuel injectors
• Electrical issues, such as wiring or connector problems
• Contaminated fuel

DTC P1185 seriousness

DTC P1185 is considered a serious issue as it can lead to engine performance problems and potential engine damage if not addressed. Low fuel delivery can cause the engine to run lean, which may result in overheating and damage to engine components. It is important to diagnose and repair this issue promptly to ensure safe and efficient vehicle operation.

How to diagnose DTC P1185

To diagnose DTC P1185, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P1185 code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the fuel system components, including the fuel pump, filter, and lines for any visible damage or leaks.
4. Test the fuel pressure using a fuel pressure gauge to ensure it meets manufacturer specifications.
5. Examine the electrical connections and wiring related to the fuel system for any signs of wear or corrosion.
6. Check the fuel injectors for proper operation and any signs of clogging.

How to fix DTC P1185 step-by-step instructions

To fix DTC P1185, follow these step-by-step instructions:

1. Address any identified issues from the diagnostic process, such as replacing a faulty fuel pump or clogged fuel filter.
2. Repair or replace any damaged fuel lines or connections.
3. Replace the fuel pressure regulator if it is found to be defective.
4. Clean or replace fuel injectors if they are clogged or malfunctioning.
5. Ensure all electrical connections are secure and free from corrosion.
6. After repairs, clear the DTC using an OBD-II scanner and take the vehicle for a test drive to verify that the issue has been resolved.

How to erase DTC P1185

To erase DTC P1185, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Access the scanner’s menu and select the option to read or clear trouble codes.
4. Choose the option to erase the DTCs.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.